DC fz hm n vf ae hm mm 0,16 0,36 0,29 0,25 0,18 0,16 0,14 0,31 0,26 0,22 0,16 0,14 0,12 0,27 0,22 0,19 0,14 0,12 0,10 0,22 0,18 0,16 0,12 0,10 0,15 0,34 0,27 0,24 0,17 0,15 0,13 0,29 0,24 0,21 0,15 0,13 0,11 0,25 0,20 0,17 0,13 0,11 0,09 * 0,20 0,16 0,14 0,10 0,09 * ae = 0,2 x DC 0,3 x DC 0,4 x DC 0,75 x DC 1 x DC hm mm N/mm² ...–800 0,16 800–1000 0,14 1000–1200 0,12 1200–... 0,10 ...–750 0,15 750–900 0,13 900–1150 0,11 1150–... 0,09 * 2 1 0 0,05 0,10 0,15 0,20 0,25 0,30 0,35 10 20 30 40 50 60 0,40 0,45 70 80 90 100 0,050 0,075 0,100 0,125 0,150 0,200 0,250 0,300 0,350 0,400 Select appropriate average chip thickness [hm] for the steel from the table. Corrected feed rate value fz for hm Select the corrected feed rate value from the table based on the appropriate average chip thickness [hm] and width of cut [ae]. Material Tensile strength for steel for steel for steel for steel for stainless steel for stainless steel for stainless steel for stainless steel Shoulder milling Start values fz in mm from starting parameter diagram Corrected Values fz in mm ae in % Average chip thickness [hm] – the approach * fz < 0.08 mm: Risk of tool no longer cutting properly Example: Start value (fz) = 0.003" ae = 30 % corrected value (fz) = 0..006" Indexable Milling Technical Information