Material examples for cutting data tables Material sub-group Index Composition / Structure / Heat treatment Hardness HB / HRC Material number Material designation Material number Material designation Tensile strength N/mm² P Unalloyed steel P.1.1 < 0.15 % C, annealed 420 N/mm2 / 125 HB 1.0401 C15 1.1141 Ck15 P.1.2 < 0.45 % C, annealed 640 N/mm2 / 190 HB 1.1191 C45E 1.0718 9SMnPb28 P.1.3 < 0.45 % C, tempered 840 N/mm2 / 250 HB 1.1191 C45E 1.0535 C55 P.1.4 < 0.75 % C, annealed 910 N/mm2 / 270 HB 1.1223 C60R 1.0535 C55 P.1.5 < 0.75 % C, tempered 1010 N/mm2 / 300 HB 1.1223 C60R 1.0727 45S20 Low-alloy steel P.2.1 Annealed 610 N/mm2 / 180 HB 1.7131 16MnCr5 1.6587 17CrNiMo6 P.2.2 Tempered 930 N/mm2 / 275 HB 1.7131 16MnCr5 1.6587 17CrNiMo6 P.2.3 Tempered 1010 N/mm2 / 300 HB 1.7225 42CrMo4 1.3505 100Cr6 P.2.4 Tempered 1200 N/mm2 / 375 HB 1.7225 42CrMo4 1.3505 100Cr6 High-alloy steel and high-alloy tool steel P.3.1 Annealed 680 N/mm2 / 200 HB 1.4021 X20Cr13 1.4034 X46Cr13 P.3.2 Hardened and tempered 1100 N/mm2 / 300 HB 1.2343 X38CrMoV5-1 1.4034 X46Cr13 P.3.3 Hardened and tempered 1300 N/mm2 / 400 HB 1.2343 X38CrMoV5-1 1.4034 X46Cr13 Stainless steel P.4.1 Ferritic / martensitic, annealed 680 N/mm2 / 200 HB 1.4016 X6Cr17 1.2316 X36CrMo16 P.4.2 Martensitic, tempered 1010 N/mm2 / 300 HB 1.4112 X90CrMoV18 1.2316 X36CrMo16 M Stainless steel M.1.1 Austenitic / austenitic-ferritic, quenched 610 N/mm2 / 180 HB 1.4301 X5CrNi18-10 1.4571 X6CrNiMoTi17-12-2 M.2.1 Austenitic, tempered 300 HB 1.4841 X15CrNiSi25-21 1.4539 X1NiCrMoCu25-20-5 M.3.1 Austenitic / ferritic (Duplex) 780 N/mm2 / 230 HB 1.4462 X2CrNiMoN22-5-3 1.4501 X2CrNiMoCuWN25-7-4 K Grey cast iron K.1.1 Pearlitic / ferritic 350 N/mm2 / 180 HB 0.6010 GG-10 0.6025 GG-25 K.1.2 Pearlitic (martensitic) 500 N/mm2 / 260 HB 0.6030 GG-30 0.6045 GG-45 Spherulitic graphite cast iron K.2.1 Ferritic 540 N/mm2 / 160 HB 0.7040 GGG-40 0.7060 GGG-60 K.2.2 Pearlitic 845 N/mm2 / 250 HB 0.7070 GGG-70 0.7080 GGG-80 Malleable iron K.3.1 Ferritic 440 N/mm2 / 130 HB 0.8035 GTW-35-04 0.8045 GTW-45 K.3.2 Pearlitic 780 N/mm2 / 230 HB 0.8165 GTS-65-02 0.8170 GTS-70-02 N Aluminium wrought alloy N.1.1 Non-hardenable 60 HB 3.0255 Al99,5 3.3315 AlMg1 N.1.2 Hardenable, age-hardened 340 N/mm2 / 100 HB 3.1355 AlCuMg2 3.2315 AlMgSi1 Cast aluminium alloy N.2.1 ≤ 12 % Si, non-hardenable 250 N/mm2 / 75 HB 3.2581 G-AlSi12 3.2163 G-AlSi9Cu3 N.2.2 ≤ 12 % Si, hardenable, age-hardened 300 N/mm2 / 90 HB 3.2134 G-AlSi5Cu1Mg 3.2373 G-AlSi9Mg N.2.3 > 12 % Si, non-hardenable 440 N/mm2 / 130 HB G-AlSi17Cu4Mg G-AlSi18CuNiMg Copper and copper alloys (bronze/brass) N.3.1 Free-machining alloys, Pb > 1 % 375 N/mm2 / 110 HB 2.0380 CuZn39Pb2 (Ms58) 2.0410 CuZn44Pb2 N.3.2 CuZn, CuSnZn 300 N/mm2 / 90 HB 2.0331 CuZn15 2.4070 CuZn28Sn1As N.3.3 CuSn, lead-free copper and electrolytic copper 340 N/mm2 / 100 HB 2.0060 E-Cu57 2.0590 CuZn40Fe Magnesium alloys N.4.1 Magnesium and magnesium alloys 70 HB 3.5612 MgAl6Zn 3.5312 MgAl3Zn S Heat-resistant alloys S.1.1 Fe basis, annealed 680 N/mm2 / 200 HB 1.4864 X12NiCrSi 36-16 1.4865 G-X40NiCrSi38-18 S.1.2 Fe basis, age-hardened 950 N/mm2 / 280 HB 1.4980 X6NiCrTiMoVB25-15-2 1.4876 X10NiCrAlTi32-20 S.2.1 Ni or Co basis, annealed 840 N/mm2 / 250 HB 2.4631 NiCr20TiAl (Nimonic80A) 3.4856 NiCr22Mo9Nb S.2.2 Ni or Co basis, age-hardened 1180 N/mm2 / 350 HB 2.4668 NiCr19Nb5Mo3 (Inconel 718) 2.4955 NiFe25Cr20NbTi S.2.3 Ni or Co basis, cast 1080 N/mm2 / 320 HB 2.4765 CoCr20W15Ni 1.3401 G-X120Mn12 Titanium alloys S.3.1 Pure titanium 400 N/mm2 3.7025 Ti99,8 3.7034 Ti99,7 S.3.2 Alpha + beta alloys, age-hardened 1050 N/mm2 / 320 HB 3.7165 TiAl6V4 Ti-6246 Ti-6Al-2Sn-4Zr-6Mo S.3.3 Beta alloys 1400 N/mm2 / 410 HB Ti555.3 Ti-5Al-5V-5Mo-3Cr R56410 Ti-10V-2Fe-3Al H Hardened steel H.1.1 Hardened and tempered 46–55 HRC H.1.2 Hardened and tempered 56–60 HRC H.1.3 Hardened and tempered 61–65 HRC H.1.4 Hardened and tempered 66–70 HRC Chilled iron H.2.1 Cast 400 HB Hardened cast iron H.3.1 Hardened and tempered 55 HRC O Non-metal materials O.1.1 Plastics, duroplastic ≤ 150 N/mm2 EP, MF, PF, UP O.1.2 Plastics, thermoplastic ≤ 100 N/mm2 PA, PC, PE, PI, PMMA, POM, PP, PS, PTFE, PVC O.2.1 Aramid fibre-reinforced ≤ 1000 N/mm2 AFK O.2.2 Glass/carbon-fibre reinforced ≤ 1000 N/mm2 CFRP, GFRP O.3.1 Graphite HSS Milling Cutters Cutting Data
Tooling a Sustainable Future
eCatalog 2026 - EN-INT
| Title Name |
Pages |
Delete |
Url |
| Empty |
Ai generated response may be inaccurate.
Search Text Block
Page #page_num
#doc_title
Hi $receivername|$receiveremail,
$sendername|$senderemail wrote these comments for you:
$message
$sendername|$senderemail would like for you to view the following digital edition.
Please click on the page below to be directed to the digital edition:
$thumbnail$pagenum
$link$pagenum
Your form submission was a success.
Downloading PDF
Generating your PDF, please wait...
This process might take longer please wait
